Sorted By Date
	Date		Description
		7/10/2003	Ordered preview plans
		7/20/2003	Clean out the garage and Build some benches
		8/12/2003	Kit arrived at the office
		9/2/2003	Horizontal Stab Rear Spar
		9/5/2003	Cleco & Drill rear spar
		9/6/2003	Cut tapers on front angles 710 & 714
		9/7/2003	first mistake @#$%^&*&^%$#
		9/8/2003	Consult with vans and some engineering friends
		9/10/2003	Notching the ribs around the front HS Spar
		9/16/2003	left side HS skin
		9/17/2003	Prepare Hs-404& 405
		9/18/2003	Drill the HS-702
		10/5/2003	Deburr and mark the parts for ID
		10/6/2003	Dimple understructure and left side skin.
		10/7/2003	Alodine and Prime
		10/8/2003	Rivet the HS Understructure
		10/9/2003	Rivet HS Front Spar and structure
		10/11/2003	finish riveting the HS
		10/16/2003	Drill Deburr and Dimple the Vertical Stabilizer
		10/17/2003	Fly cut the lightening holes and prep
		10/18/2003	Alodine Prime and assemble Vertical Stab Spar
		10/20/2003	Finishing the Vertical Stabilizer
		10/20/2003	Fabricate Rudder Stiffeners
		10/26/2003	Edge finish the stiffeners
		10/27/2003	Match drill Left side Rudder stiffeners
		11/1/2003	Dimpled the rudder left side
		11/2/2003	Alodine and prime stiffeners
		11/3/2003	Back Riveted The L/S rudder Skin
		11/8/2003	inspection of left side rudder
		11/9/2003	Right side rudder skin stiffeners.
		11/11/2003	Rivet right side Rudder Skin
		11/15/2003	Building the rudder skeleton
		11/16/2003	Really big rudder day
		11/19/2003	Wing Jigs
		11/19/2003	Countersink the Rudder trailing edge wedge
		11/23/2003	Alodine, Prime and Assemble the rudder Skeleton
		11/28/2003	Closing the Rudder and riveting the skins
		11/28/2003	Back rivet the stiffeners & doubler
		11/29/2003	Riveting the rudder trailing edge
		12/26/2003	Preparing the Rudder Skin Stiffeners
		12/27/2003	Deburr, Dimple, Alodine and Prime
		12/29/2003	EAA Tech Visit
		1/1/2004	Major Elevator Progress Today
		1/3/2004	Disassemble. Deburr
		1/4/2004	Riveting the right elevator
		1/5/2004	Finish riveting the right elevator
		2/7/2004	Freebee Steel wing jig
		2/15/2004	Status report and Fiberglass Tips
		2/16/2004	Horizontal Stabilizer fiberglass tips
		2/16/2004	Fiberglass Tips Continued
		2/20/2004	Trimming the H/S fiberglass tips.
		2/21/2004	Glassing & attaching Fiberglass tips
		2/22/2004	Glassing and fairing the tips
		2/25/2004	Lengthen the jig to 114"
		2/25/2004	Fairing fiberglass tips with lightweight filler
		2/26/2004	More fairing of Fiberglass tips
		3/2/2004	More fairing on the Elevator tips
		3/5/2004	Finished fiberglass on left & right elevators tips
		3/6/2004	Working on the fiberglass tips
		3/7/2004	Vertical Stabilizer Fiberglass tip work
		3/9/2004	Fiberglass tip work
		3/12/2004	Reorganize rivet storage
		3/13/2004	Installing Rudder Tip.
		3/14/2004	Rudder Tip fairing
		3/17/2004	Glassing the Rudder tip cont…
		3/20/2004	Rudder tip Cont.
		3/21/2004	Rudder fiberglass tip
		3/23/2004	Finishing the rudder tip
		3/24/2004	Fairing the fiberglass tip
		3/27/2004	Finished with VS Tip!
		3/28/2004	Accident Almost!
		4/5/2004	Wings ship this week
		4/8/2004	Wings arrive tomorrow!!!
		4/9/2004	Wing Kit arrives
		4/10/2004	Wings, unpacking and inventorying
		4/11/2004	Ready to start on spar countersinking
		4/12/2004	Spar
		4/13/2004	Started installing platenuts on right spar
		4/14/2004	Finished Tank platenuts on right spar
		4/16/2004	Finished Tank platenuts on left spar
		4/17/2004	Inspection platenute both spars & more…
		4/18/2004	Fabricate and install Tie Down Brackets on Spar.
		4/19/2004	Left wing Rear Spar Prep
		4/21/2004	Left wing rear spar
		4/22/2004	Rib deburring and edge prep
		4/23/2004	Fluting and straitening ribs
		4/24/2004	primed and assembled rear spar and test fit ribs
		4/24/2004	Fluting left wing main ribs
		4/25/2004	Prep. Alodine, Prime & Assemble Wing Skeleton
		4/26/2004	Brackets and braces
		4/27/2004	Riveted Main Ribs to spar
		4/28/2004	Jigged the wing and started skinning
		4/29/2004	Skinning left wing continued
		4/30/2004	Drilling Left wing skins Continued.
		5/1/2004	Left wing leading edge skin
		5/2/2004	Tank to leading edge strip and "Z" brackets
		5/3/2004	Fabricate tank "Z" brackets
		5/5/2004	"Z" Brackets Continued
		5/6/2004	Redoing the fuel Tank Brackets.
		5/7/2004	Left wing "Z" brackets continued
		5/9/2004	Build Dimpling Table
		5/10/2004	Tank Stiffeners and fuel Trap door for left wing
		5/15/2004	Checking out the RV's
		5/16/2004	Drilling the Gas cap and fuel tank rib prep
		5/18/2004	Gas Caps and capacitance Senders
		5/19/2004	First flight in a RV-7 200HP C/S prop "N714D"
		5/20/2004	Left Wing Fuel Tank
		5/22/2004	More Left Fuel Tank
		5/25/2004	Left Fuel Access Plate
		5/26/2004	Fuel Tank Prep
		5/28/2004	Prosealed Tank Stiffeners, drain and the gas cap
		5/29/2004	Priming Day at Walter Tondu's
		5/31/2004	Riveted the Left Leading edge and more
		6/1/2004	Left Leading edge skin work
		6/2/2004	Riveted Leading Edge left wing
		6/3/2004	Skin work and rib dimpling
		6/5/2004	Dimpled outboard skin & more
		6/6/2004	Fuel Tanks and leading edge work
		6/7/2004	Riveted left L.E. Ribs to Spar
		6/8/2004	Fit wing skins and dimpled understructure
		6/9/2004	Deburr, Dimple, & more
		6/14/2004	More wing skin work
		6/15/2004	Trim Skin for landing light
		6/16/2004	left landing light cutout
		6/17/2004	Left Wing Landing Light
		6/20/2004	Prepping for Proseal
		6/21/2004	EAA Tech inspection and Trip to the New Spaceport!
		6/23/2004	Drill and cleco the F-719 skin stiffeners
		6/25/2004	Proseal At Last!
		6/27/2004	Left Tank almost done
		6/30/2004	Tank Plumbing & Senders
		7/2/2004	Left tank plumbing and wiring
		7/3/2004	Finished Left Fuel Tank
		7/5/2004	Riveted inboard top skin, worried about sealant!
		7/7/2004	Skin doubler plate for Pitot Tube
		7/12/2004	Rivet top skins
		7/13/2004	wing interior work
		7/14/2004	More Skin riveting!
		7/17/2004	Pitot tube cutout
		7/19/2004	Attach Aileron brace to rear spar
		7/21/2004	Install Aileron Gap fairing Left wing
		7/23/2004	Rear spar flap brace
		7/24/2004	TC inspection
		7/25/2004	Checking one small detail
		7/26/2004	working on flap brace
		7/27/2004	Aileron Bellcrank and Push tubes
		7/28/2004	Fluted the right wing ribs
		7/31/2004	Pushrods and shop reorganization
		8/1/2004	Installed Pushrods and dimpled skins
		8/2/2004	riveting bottom skin
		8/4/2004	Riveted the inboard skin to the inboard three ribs
		8/8/2004	Riveting bottom skin
		8/9/2004	more riveting
		8/10/2004	More riveting on bottom skin
		8/12/2004	Left Wing Complete, started on the right wing
		8/15/2004	It's déjà Vu all over again on the right wing.
		8/16/2004	Riveted rear spar and assembled skeleton
		8/17/2004	Rib Prep, Alumiprep and alodine.
		8/18/2004	Prime Left Wing Ribs
		8/19/2004	Big wing day!!
		8/20/2004	Match drilled the top skins
		8/21/2004	Drilled bottom skins
		8/22/2004	Way Too Much Fun!!!
		8/24/2004	Drilled Leading edge and mounted on spar
		8/25/2004	Fuel Tank "Z" brackets
		8/26/2004	Match drilling fuel tank rear baffle to Z brackets
		8/31/2004	More right wing leading edge
		9/1/2004	Fuel Tank and leading edge
		9/3/2004	Access plate and nose angle
		9/4/2004	More tank / Nuclear Suntan Device
		9/5/2004	Final fuel tank prep before Proseal
		9/6/2004	Prosealed stiffeners
		9/11/2004	Prosealed and riveted gas cap flange & tank drain
		9/12/2004	More prosealing right tank
		9/17/2004	More Proseal on right tank
		9/18/2004	Mugu Air show and Proseal Fuel Tank
		9/19/2004	Fuel tank plumbing and Baffle work
		9/21/2004	Counter sink spars for leading edge
		9/22/2004	Prime Leading edge ribs and Z brackets
		9/23/2004	Dimpled the leading edge ribs
		9/24/2004	Riveted the leading edge together
		9/26/2004	Prosealed fuel tank and more
		9/28/2004	Finished the damn fuel tanks
		9/29/2004	Removed vinyl and deburred the outboard skin
		10/1/2004	Top skins are completely riveted
		10/2/2004	Leak tested right wing tank
		10/3/2004	Mounted right fuel tank, wing on dolly
		10/4/2004	Aileron Brackets and Gap Seal
		10/7/2004	Sorry Folks, On Vacation
		10/19/2004	Aileron and flap attachments Right Wing.
		10/20/2004	More rear spar work
		10/21/2004	Fabricated aileron stiffeners
		10/22/2004	More Aileron Stiffener work
		10/23/2004	Dimpled aileron stiffeners and skins
		10/24/2004	Riveted aileron stiffeners and PARTY!!!
		10/25/2004	More Aileron Work
		10/26/2004	More aileron prep work
		10/27/2004	Dimpled the aileron skeletons
		10/29/2004	Alodined and dimpled
		10/30/2004	More aileron prep, Primed skeleton
		11/1/2004	Aileron Doublers
		11/2/2004	Lunchtime Supply Run to AC and flying with Dan C.
		11/3/2004	Riveted the ailerons
		11/4/2004	Right Aileron Completed
		11/5/2004	Ailerons complete, starting Flaps
		11/6/2004	Fabricated flap brace FL-706A
		11/7/2004	Deburr, alumiprep, alodine and prime
		11/9/2004	Almost ready to rivet flaps
		11/11/2004	Riveting Left Flap
		11/12/2004	Left Flap Completed!
		11/13/2004	Right flap ready to rivet
		11/14/2004	Completed right flap
		11/15/2004	Right wing bottom skin prep
		11/16/2004	flap brace and bottom skins
		11/17/2004	Dimpling and prepping for skinning
		11/18/2004	Bottom skins dimpled!
		11/19/2004	Installed the conduit and vacuumed
		11/20/2004	Riveting Bottom skins
		11/21/2004	Finished riveting the bottom skins
		11/22/2004	Mounting flaps
		11/23/2004	Drilled right flap hinge and mounted
		11/25/2004	Flap hinge prep
		11/26/2004	flaps complete!
		11/27/2004	Wings Finished!
		11/30/2004	Fine Living Television show
		12/3/2004	Fuselage picked up at FedEx
		12/4/2004	UNPACKING THE CRATE
		12/5/2004	More Unpacking
		12/6/2004	more unpacking
		12/9/2004	Fluting bulkheads and fabbing firewall angles
		12/15/2004	Fitting and match drilling Stiffeners
		12/17/2004	firewall and hardware bags
		12/18/2004	Prepped firewall for Assembly
		12/22/2004	Riveted the firewall
		12/28/2004	Drilling the F704 Bulkhead
		12/29/2004	F-704 control mounting bracket fabrication
		12/31/2004	Control sticks on F-704 bulkhead
		1/2/2005	More 704 bulkhead
		1/4/2005	Riveted sides to aft F-704 Bulkhead
		1/9/2005	finished 7F-704, Started F-705
		1/16/2005	F-705 Bulkhead assembly
		1/17/2005	More F-705 Bulkhead
		1/22/2005	More F-705 Bulkhead
		1/30/2005	Major Priming Day
		2/6/2005	Moved wings to hangar, more bulkhead work
		2/7/2005	F-705 Bulkhead
		2/12/2005	706 bulkhead and bellcrank support structure
		2/13/2005	More bulkhead prep, 711 & 712
		2/18/2005	More rear bulkheads, DAAP
		2/19/2005	EAA 96Chapter meeting and Rear Bulkheads
		2/20/2005	Finished Bulkheads and fitted Tail wheel Weldment.
		2/21/2005	Finally, working on skins
		2/22/2005	Clecoed up the Rear Fuselage
		2/23/2005	Tail wheel box
		2/27/2005	Sometimes you just gotta go fly
		3/6/2005	711 and 712 bulkheads reflange and BFR
		3/13/2005	Aft bottom skin and "J" channels
		3/14/2005	More match drilling on J channels
		3/18/2005	Drilled lower "J" channels
		3/26/2005	Flipped Fuselage and matchdrilled remaining holes
		3/27/2005	Countersinking and riveting the bottom tail skin
		3/31/2005	Remove protective Plastic and Deburr Skins
		4/2/2005	Deburring and Dimpling
		4/3/2005	Riveting again at last!
		4/5/2005	More riveting on the Tail cone
		4/6/2005	More riveting on tail cone
		4/7/2005	Little bit of riveting
		4/9/2005	More riveting and fabrication of rudder stops
		4/24/2005	Moved entire project to the Torrance Airport!
		4/26/2005	Setting up to build at TOA hangar
		4/29/2005	Fabricated Spacers and Modified Center seat ribs
		4/30/2005	Clecoed the center section together
		5/2/2005	More match drilling
		5/3/2005	Center section and Tech counselor visit.
		5/8/2005	Drilled seat pan skins and fabricated tunnel cover
		5/10/2005	Prepping Center section
		5/19/2005	Prepped & primed, Center fuse ready for riveting
		5/22/2005	Riveted Seat and Baggage floor ribs, moved wings
		5/24/2005	Riveted Seat Ribs
		5/27/2005	Joined rear and center section
		6/8/2005	Baggage ribs and Conical bend
		6/17/2005	Drilling Longerons and more
		6/18/2005	More longeron drilling
		6/19/2005	Drilling skins. Hung the firewall
		6/21/2005	Drilled and Clecoed the firewall
		6/22/2005	Aux Longerons and clips
		6/24/2005	Fabricated and installed the lower Longeron F-717
		7/2/2005	Fabricating and installing gussets
		7/6/2005	Fabricate F-796 Bracket and spacers
		7/10/2005	Fabricated brakes pedals
		7/12/2005	Brakes and rudder pedals
		7/15/2005	Firewall gussets
		7/16/2005	Fitting rudder and brake assembly to fuselage.
		7/22/2005	Rudder Brace and Technical Visit
		7/30/2005	Suddenly single and other stuff
		7/31/2005	Final match drilling of forward fuselage
		8/7/2005	Disassembly and prep
		8/19/2005	Disassembly for prep
		8/20/2005	Dimpled the forward bottom skin
		8/21/2005	Walter flies again
		8/27/2005	More Dimpling and prep.
		8/30/2005	Countersinking the Longerons and more prep
		9/4/2005	Almost ready to reassemble fuselage for riveting
		9/13/2005	Fuselage assembly
		9/17/2005	Assembly and riveting.
		9/18/2005	Riveting at last
		9/19/2005	More Fuselage Riveting
		9/20/2005	More forward Fuselage riveting
		9/22/2005	Floor Stiffeners and firewall to longeron bolts
		9/25/2005	TIPPED THE CANOE TODAY!!!
		10/1/2005	Forward & Aft Canopy deck,.
		10/2/2005	Installing the F-695 Gussets and panel planning
		10/13/2005	Dan Checkoway makes another technical visit.
		10/15/2005	drilling the Aft Deck!
		10/21/2005	Riveted Aft Deck and More
		10/22/2005	left canopy rail and canopy gussets
		11/25/2005	Back from China pounding rivets again
		12/8/2005	Cleco on aft fuselage Turtle deck skins
		12/10/2005	F-688 gusset, canopy decks and F-757 tip up plate
		12/16/2005	more work on the turtle deck
		12/18/2005	Bulkhead gussets and shoulder harness tie downs
		12/25/2005	Baggage area , priming & planning the move.
		1/3/2006	Moved the project
		1/9/2006	Baggage compartment sides and floors
		1/15/2006	modified seat ribs for control sticks
		1/18/2006	Drilled holes for electrical bushings
		1/22/2006	Conduits and baggage area
		1/30/2006	Primed Seat Pans
		2/1/2006	Cockpit Seats
		2/4/2006	Seat Pans
		2/10/2006	Drilled and fitted cockpit forward tunnel cover
		2/13/2006	Cockpit Trim covers
		2/14/2006	Flap motor assembly and fuel pump base
		2/18/2006	Fuel pump Indexing
		2/20/2006	Fuel Valve plate
		2/25/2006	Fuel Valve cover and priming
		2/26/2006	Fuel pump complete, on to flap motor.
		2/27/2006	Flap actuator and motor
		3/4/2006	Mated Wings and set incidence and sweep
		3/5/2006	Made second landing light cutout
		4/1/2006	Finish kit Arrives!
		4/3/2006	Built storage loft for finish kit components
		4/8/2006	Fuel Valve and Fuel lines
		4/28/2006	Preparing to Attach horizontal Stabilizer
		4/29/2006	Attached the Horizontal Stab to the Fuselage
		4/30/2006	Prepping to attach Vertical Stabilizer
		5/2/2006	attaching Vertical Stabilizer
		5/21/2006	Empennage mounted for good
		5/22/2006	Mounted the Engine mount
		6/3/2006	Plane is on the Landing Gear!
		6/5/2006	Fabricated three Pushrods
		6/7/2006	Rigging the control system
		6/8/2006	Trimming and rigging the flaps & peeling plastic.
		6/10/2006	Rigging Flap pushrods
		10/2/2006	Fabricate Tank Vents
		10/6/2006	Fabricated the Battery Box
		10/8/2006	Fabricated Right wing Fuel and breather lines
		10/9/2006	Left Wing Fuel and vent lines
		10/11/2006	Installed Rudder Steering Link
		10/14/2006	Attached both wing tips
		10/15/2006	Baggage compartment bulkhead
		11/10/2006	Painting the Cockpit
		12/3/2006	Master contactors and backing plate
		12/5/2006	Installed the static ports and lines
		12/6/2006	Installed Spar Caps & paint prep
		12/7/2006	Installed Naca Ducts
		12/8/2006	Painted the Cockpit
		12/10/2006	Plumbed the brake pedals
		12/11/2006	Installing Fuel vent lines
		12/12/2006	Brakes and sub panel
		12/15/2006	Instrument Sub panel
		12/17/2006	Fabricating the Cabin frame roll bar
		12/23/2006	The airplane has numbers
		12/31/2006	Fabricating the F-631 cabin frame "ROLL BAR"
		1/1/2007	More fabricating the F-631 cabin frame "ROLL BAR"
		1/3/2007	More Cabin Frame Fabrication
		1/6/2007	More Cabin Frame
		1/13/2007	Riveting the Cabin Frame
		1/14/2007	Cabin frame riveted
		1/15/2007	More cabin frame
		1/16/2007	Tip up modification to cabin frame connection
		1/20/2007	Cabin Frame mounting
		1/21/2007	Riveting the Channel to the Cabin Frame
		1/23/2007	Painted cabin frame
		1/24/2007	Installed Cabin frame
		1/27/2007	Making the instrument panel
		1/28/2007	Cutting the panel part 2
		2/2/2007	Fitting avionics in the instrument panel
		2/4/2007	Mounted the magnetometer
		2/8/2007	Riveted the sub panel, installed the clock
		2/9/2007	Made AHARS Tray
		2/14/2007	wiring on the sub panel
		2/15/2007	Installed power buss and ELT
		2/19/2007	More wiring
		2/20/2007	Control Stick wiring, brakes and Instruments
		2/23/2007	Installed Com Antenna
		2/24/2007	Installed other antenna and more
		3/11/2007	Fuel line, fuel purge and Manifold Pressure
		3/12/2007	Control stick and sensor wiring.
		4/1/2007	Installed the manifold pressure sensor fitting
		4/4/2007	Connected Elevator trim tab servo
		4/5/2007	More electrical wiring.
		4/6/2007	Installed and powered the flap & starter switches
		4/7/2007	Installed ELT push to test switch
		4/10/2007	Installed Aileron Trim assembly kit
		4/16/2007	Worked on the bearing blocks
		4/19/2007	Riveting aft turtledeck skin
		4/20/2007	Riveted the aft turtledeck skin
		4/23/2007	Installed Canopy Hinge Bearing Blocks
		4/30/2007	Canopy latch Mechanism
		5/3/2007	Tidying up details
		5/6/2007	Canopy Latch Linkage
		5/12/2007	Wiring
		6/6/2007	Landing lights and Wig-Wag
		6/8/2007	Wiring trim indicators to EFIS
		6/12/2007	Cockpit vents, EIS programming, and tip plexi
		6/20/2007	Finished right wing tip
		6/22/2007	Nutplates on the left wing tip
		6/24/2007	Removed wings and firewall work
		6/25/2007	Install hinge on the left side of the firewall
		6/26/2007	More cowl hinges
		6/27/2007	Installed Aileron Trim Servo
		6/28/2007	Aileron Trim Servo and stick wiring
		6/29/2007	Connected trims to EFIS indicator
		6/30/2007	Running wing wiring and comm coax
		7/6/2007	More wiring and a little paint
		7/7/2007	Empennage fairing
		7/8/2007	More empennage fairing
		7/13/2007